BX-1 Series X-ray Tubes- BX-1 0.8 mm 12 degree X-ray Tube
Proud to be a manufacturer of quality x-ray tubes for over 15 years.         

 Please use the arrows to cycle through listed x-ray tubes.

BX-1 0.8 mm 12 degree x-ray tube
Click photo to enlarge.              
Application:  The BX-1 0.8mm 12 degree is a non-directional beam X-ray tube for use in both medical and industrial applications.

Tungsten target cast in solid copper anode.   
Line focus, tungsten filament.    
Hard glass, gettered.
210 grams, approx.
Focal Spot Size:        
0.8 mm, per NEMA Std.  XR 5-1984
Target Angle:            
12 degrees effective.  (20 degrees absolute, double-tilt
 geometry, rotated 55 degrees approx.)
External molded cylindrical shield available with a
lead equivalence of 1mm typical (170 grams typical).

Electrical Ratings:
Maximum 90 kVp self-rectified.
Maximum 95 kVp inverse.
Maximum 100 kVp starting surge.


Thermal Ratings:

2.20 Amperes Maximum.

Energy Storage:               
22.8 kHU (16.3 kJ)      
Energy dissipation:     
Maximum 300 HU/sec (215 J/sec) continuous.    
 Cooling rate:                       
Maximum 9.7 kHU/min (6.9 kJ/min) averaged over a
one minute interval.

Cooling and Insulation:

     This tube is intended to be used in an environment in which a high-grade transformer oil is used as the primary means of cooling and insulation.  
The oil should have a minimum dielectric strength of 45 kVp per ASTM D 877-49.  All ratings herein assume operation in well circulated oil.