BX-4 1.0 mm 10 Degree X-ray Tube
Proud to be a manufacturer of quality x-ray tubes for over 15 years.         
Please use the arrows to cycle through listed x-ray tubes.    

BX-4 1.0 mm 10 degree x-ray tube

Application: The BX-4 1.0 mm 10 degree is a non-directional beam x-ray tube for use in compact self-contained medical, dental and industrial tube heads.

Tungsten target cast in solid copper anode.   
Line focus, tungsten filament.    
Hard glass, gettered.
380 grams, approx.
Focal Spot Size:        
1.0 mm, per NEMA Std.  XR 5-1984
Target Angle:            
10 degrees effective.  
External molded cylindrical shield available with a
lead equivalence of 1mm typical (445 grams typical).

Electrical Ratings:
Maximum 100 kVp self-rectified.
Maximum 105 kVp inverse.
Maximum 105 kVp starting surge.


2.2 Amperes Maximum.

Thermal Ratings:
Energy Storage:               
24  kJ (34 kHU)     
Energy dissipation:     
Maximum 225 J/sec (315 HU/sec) continuous.   
 Cooling rate:                       
Maximum 10.8 kJ/min (15.1 kHU)averaged over a
one minute interval.

Cooling and Insulation:

     This tube is intended to be used in an environment in which a high-grade transformer oil is used as the primary means of cooling and insulation.  
The oil should have a minimum dielectric strength of 45 kVp per ASTM D 877-49.  All ratings herein assume operation in well circulated oil at a temperature of 70 degrees C maximum.